English
 |
| Color: | |
|---|---|
| Grit: | |
| Head diameter: | |
| Quantity: | |
The grinding strength and speed are determent by the flutes on the bit, dip and large flutes give you coarse grit, and smaller flutes commonly indicate a finer bit.
The finer grit bits are ideal for base coat removing, smooth out the top of artificial nails, or cuticle curves cleaning; the coarser grit bits are great for thinning down hard gels, removing gel topcoat, acrylics, dipping powder and extension nails.
Product Description
The Easywell Silicon polisher is hot sale of our nail drill bits. Also called silicon rubber polisher.We have four different sizes for your reference ,the smallest size is 4*12.0mm and the largest is 15*17mm. The holder decorated with different shape for particular using .Usually ,the silicone polisher is widely used as callus grinding .It is made with Japanese rubber , silicon and aluminum oxides. the rubber is known as skid resistance ,so it is not easy to break away from the shank when it is rotating ..Refined shank is made of premium steel. Weight Balanced Shank brings a high concentricity to our holder. It is more stable when it is rotating.Every Silicon polisher is single packed in the box sized 1*1*7CM. And we provide customized package and technique assistance for our customers.
(F)4.0*12
(F)6.0*16
(F)10*20
(F)10*24
(F)10*17
(F)13*20
(F)14*17
(F)15*17
Features of Easywell Silicon Polisher
· Optional coarseness and color for you to choose
· Made with Japanese silicon and aluminum oxide
· High concentricity
· Safer for clients
· No clogging
· 3/32’’ or 1/8’’ shank diameter
Proper Care
Follow these steps to clean and sanitize your silicon polisher：
Step #1
a. Put the product into a disposable sterilization bag or special sterilization box and pack it up.
b. Load the packaged products into the sterilizer;
c. Set sterilizer parameters: temperature 134℃, sterilization time 5min, drying time 10min.
Step #2
After one sterilization cycle is complete, remove the product from use when cooled.
Step #3
This product should be stored in a cool, dry, well ventilated and clean environment with humidity not exceeding 80%. Shelf life is 3 years.
Factory Introduction
1. Dedicated in high quality ABRASIVE PRODUCTS manufacturing and exporting. Professional NAIL ART SUPPLIER.
2. Main Products: Sanding Band, Carbide Bit, Ceramic Bit, Diamond Bit, Sanding Cap, Stone Bit, Brush Bit, Nail Drill Bit Mandrel.
3. Our market covers USA, Canada, Germany, UK, Italy, Poland and other 42 countries.
4. Independent foreign trade department for dealing with international business.
5. Complete and strict QC system covers raw material purchasing, production process, and products packing. We have passed the ISO9001:2000 quality management system certification.
6. One-stop service from production to delivery, meanwhile, we have professional and abundant OEM/ODM service experience for different clients with all kinds of business type.
7. 20 sanding band product lines, which can produce 20 million pieces per month; 2 sanding cap assembly lines, production capacity is 5 million pieces per month. For Nail Drill Bit, Production Capacity is Seven hundred thousand per month.
Our team best service for you ,professional sales team,hard working workers,diligent engineers in abrasive fields.
7x24 hours online ,more than 15 years factory experience, 7 years Export experience
Q1. What products your company specialize in?
A: We specialize in nail sanding band,sanding cap, many kinds of nail drill bits like diamond,ceramic,carbide, corundum etc for more than 6 years.
Q2. What's your payment terms?
A: T/T in advance, west union, trade assurance and Paypal
Q3. How do you ship the order normally?
A: For large qty order,ship the goods by sea. For small qty order, DHL,FEDEX,UPS,TXT,EMS,ARAMES and so on.
Q4. How to get the price list?
A: Pls email, call or fax to us and tell us the commodity name and your detailed information (name, email address,telephone,etc),we will send to you at the earliest time.
Q5.Can I use my own forwarder to transport the products for me?
A: Of course.
Q6.Can we print our own brand for the fixtures ?
A: Of course.Will be our pleasure to be one your good OEM manufacturer in China to meet your OEM requirements.
Q7.Does the products have CE/ROHS certificate?
A: We can offer ISO9001,CE certificated as per your requirements.
Q8. How to Place an order?
A:1.Send us your order by emial or Fax; 2.Confirm PI; 3.Arrange Deposit; 4.Arrange production; 5.Arrange balance payment; 6.Arrange your shipment.
The grinding strength and speed are determent by the flutes on the bit, dip and large flutes give you coarse grit, and smaller flutes commonly indicate a finer bit.
The finer grit bits are ideal for base coat removing, smooth out the top of artificial nails, or cuticle curves cleaning; the coarser grit bits are great for thinning down hard gels, removing gel topcoat, acrylics, dipping powder and extension nails.
Product Description
The Easywell Silicon polisher is hot sale of our nail drill bits. Also called silicon rubber polisher.We have four different sizes for your reference ,the smallest size is 4*12.0mm and the largest is 15*17mm. The holder decorated with different shape for particular using .Usually ,the silicone polisher is widely used as callus grinding .It is made with Japanese rubber , silicon and aluminum oxides. the rubber is known as skid resistance ,so it is not easy to break away from the shank when it is rotating ..Refined shank is made of premium steel. Weight Balanced Shank brings a high concentricity to our holder. It is more stable when it is rotating.Every Silicon polisher is single packed in the box sized 1*1*7CM. And we provide customized package and technique assistance for our customers.
(F)4.0*12
(F)6.0*16
(F)10*20
(F)10*24
(F)10*17
(F)13*20
(F)14*17
(F)15*17
Features of Easywell Silicon Polisher
· Optional coarseness and color for you to choose
· Made with Japanese silicon and aluminum oxide
· High concentricity
· Safer for clients
· No clogging
· 3/32’’ or 1/8’’ shank diameter
Proper Care
Follow these steps to clean and sanitize your silicon polisher：
Step #1
a. Put the product into a disposable sterilization bag or special sterilization box and pack it up.
b. Load the packaged products into the sterilizer;
c. Set sterilizer parameters: temperature 134℃, sterilization time 5min, drying time 10min.
Step #2
After one sterilization cycle is complete, remove the product from use when cooled.
Step #3
This product should be stored in a cool, dry, well ventilated and clean environment with humidity not exceeding 80%. Shelf life is 3 years.
Factory Introduction
1. Dedicated in high quality ABRASIVE PRODUCTS manufacturing and exporting. Professional NAIL ART SUPPLIER.
2. Main Products: Sanding Band, Carbide Bit, Ceramic Bit, Diamond Bit, Sanding Cap, Stone Bit, Brush Bit, Nail Drill Bit Mandrel.
3. Our market covers USA, Canada, Germany, UK, Italy, Poland and other 42 countries.
4. Independent foreign trade department for dealing with international business.
5. Complete and strict QC system covers raw material purchasing, production process, and products packing. We have passed the ISO9001:2000 quality management system certification.
6. One-stop service from production to delivery, meanwhile, we have professional and abundant OEM/ODM service experience for different clients with all kinds of business type.
7. 20 sanding band product lines, which can produce 20 million pieces per month; 2 sanding cap assembly lines, production capacity is 5 million pieces per month. For Nail Drill Bit, Production Capacity is Seven hundred thousand per month.
Our team best service for you ,professional sales team,hard working workers,diligent engineers in abrasive fields.
7x24 hours online ,more than 15 years factory experience, 7 years Export experience
Q1. What products your company specialize in?
A: We specialize in nail sanding band,sanding cap, many kinds of nail drill bits like diamond,ceramic,carbide, corundum etc for more than 6 years.
Q2. What's your payment terms?
A: T/T in advance, west union, trade assurance and Paypal
Q3. How do you ship the order normally?
A: For large qty order,ship the goods by sea. For small qty order, DHL,FEDEX,UPS,TXT,EMS,ARAMES and so on.
Q4. How to get the price list?
A: Pls email, call or fax to us and tell us the commodity name and your detailed information (name, email address,telephone,etc),we will send to you at the earliest time.
Q5.Can I use my own forwarder to transport the products for me?
A: Of course.
Q6.Can we print our own brand for the fixtures ?
A: Of course.Will be our pleasure to be one your good OEM manufacturer in China to meet your OEM requirements.
Q7.Does the products have CE/ROHS certificate?
A: We can offer ISO9001,CE certificated as per your requirements.
Q8. How to Place an order?
A:1.Send us your order by emial or Fax; 2.Confirm PI; 3.Arrange Deposit; 4.Arrange production; 5.Arrange balance payment; 6.Arrange your shipment.
